manualshive.com logo in svg

Icom IC-F9011B, Operating Manual

Share
Download
Icom IC-F9011B Operating Manual Download Page 24

21

D

 Transmitting a Radio Check Call

Radio check call allows you to determine whether or not the 
targeted station is turned on, within the communication range 
and on channel, without requiring any action from the tar-
geted station user.

Not available on Non-display types.

q

   Push 

[MDC Call] to enter the MDC menu selection mode.

w

    Push

 [CH Up] or [CH Down], or rotate [CH Up/Down] to 

select “

RADIOCHK.” 

  For Handhelds: 

For Mobiles:

R A D I O C H K

I N D I V I D U A L 1

RADIOCHK

−UP

INDIVIDUAL1

MDC           SELC           CALA

e

   Push 

[MDC Call] again to enter the transceiver alias se-

lection mode.

r

   Push

 [CH Up] or [CH Down], or rotate [CH Up/Down] to 

select a desired alias.

t

   Push 

[PTT] to transmit a radio check call to the selected 

station.

 

•   “

RDO CHK” is displayed.

y

   Release 

[PTT].

 

•   “

CHK ACK” is displayed after receiving an acknowledgement 

from the targeted station.

 

•   “

CHK FAIL” is displayed if the targeted station does not receive 

the signal or send back an acknowledgement.

u

  After a preset time period has passed, the transceiver will 

return to receive.

D

 Transmitting a Status Message

Status Messaging allows you to send a preset status mes-
sage. There are 16 status codes that can be sent. In addition, 
the transceiver can send a signal that causes the targeted 
station to automatically transmit its current status.

Not available on Non-display types.

q

   Push 

[MDC Call] to enter the MDC menu selection mode.

w

   Push

 [CH Up] or [CH Down], or rotate [CH Up/Down] to 

select “

STATUS.” 

  For Handhelds: 

For Mobiles:

S T A T U S

H K

I N D I V I D U A L 1

STATUS

−UP

INDIVIDUAL1

MDC           SELC           CALA

e

   Push 

[MDC Call] again to enter the status message selec-

tion mode.

  • A preset status message is displayed.

r

   Push

 [CH Up] or [CH Down], or rotate [CH Up/Down] to 

select a desired status message.

t

   Push 

[PTT] to transmit the selected status message.

 

•   “

STAT TX” is displayed.

y

   Release 

[PTT].

 

•   “

STAT OK” is displayed after receiving an acknowledgement 

from the base station.

 

•   “

STA FAIL” is displayed if there is no acknowledgment from the 

base station.

u

  After a preset time period has passed, the transceiver will 

return to receive.

MDC 1200 SYSTEM OPERATION

3

Summary of Contents for IC-F9011B







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands