![background image](http://html.mh-extra.com/html/icom/ic-f9011/ic-f9011_user-manual_611377060.webp)
4-2-2
Cloning Items
IC-F9011 series
Connect the cloning cable, OPC-1862 to the multi-
connector first and then rotate [VOL] clockwise to
turn power ON.
Click or select <Read <- TR> in the [Clone]
menu to read out all radio's programmed cloning
data into PC before editing with this cloning
RELATED ITEMS
Confirming the COM port
Changing the COM port
➣
Quitting the CS-F9010/F9510 program
Select [Exit (X)] in the [File (F)] menu or click the
close button [ ] on the title bar.
g
g
software. Otherwise, the cloning data may not be
cloned correctly to the radio. (e.g. Memory CH, DTMF,
Common, etc.)
Introduction
CS-F9010/F9510 cloning software is designed to
perform data setting and cloning for the IC-F9011
series VHF P25 TRUNKING HANDHELD
Opening Screen
The Opening Screen consists of Top menu, Tool Bar,
Tree View and Contents list screen.
series VHF P25 TRUNKING HANDHELD
TRANSCEIVERS, and the IC-F9510 series VHF P25
TRUNKING MOBILE TRANSCEIVER.
-Launching the CS-F9010/F9510 Cloning
Software
1. Before launching the program, make sure the
di '
i t
d ON
Memory CH
radio's power is turned ON.
2. Click the [Start] button and point to
[Programs].
3. Point to the CS-F9010/F9510 folder.
4. Click the CS-F9010/F9510 program.
(or simply double click desktop short cut "CS-
F9010/F9510," which automatically created
during software installation.)
¾
Zone Operation
▒
NOTE:
➣
Please restart the software if you see an error
Set zone conditions, each zone name and capacity
(number of channels). A total of 128 zone settings
are available. Also, show the number of memory
channels condition for reference.
¾
Zone
Set the operating frequency and details of the
operating conditions for each memory channel that
ease esta t t e so t a e you see a e o
dialog box even when the connected radio is
powered on.
➣
If the problem persists, check the connection
between the computer and radio, as well as
the COM port.
p
g
y
is assigned into a zone.
60