![background image](http://html.mh-extra.com/html/icom/ic-f9011/ic-f9011_user-manual_611377052.webp)
■
Tactical Group function
Clearing the tactical group in zone 128
I di id l h
l l
i
4-1-8
Tactical Group Function
p
The Tactical Group function enables commonly
used channels to be placed together in zone 128.
▒
IMPORTANT!
▒
The tactical group operation should be enabled
▒
by your dealer with the CS-F9010/F9510
▒
cloning software. Ask your dealer for details.
— Individual channel clearing
1
Push [CH Up] or [CH Down], or rotate
[CH Up/Down] to select the channel which you
wish to clear from zone 128, then turn power
OFF.
2
While pushing [I] and [III], rotate [VOL] to turn
power ON.
• “CLEAR ?” is displayed
▒
Non-display model can be operated only as the
▒
sub transceiver.
Creating the tactical group in zone 128
— Individual channel copy
1
Push [CH Up] or [CH Down], or rotate
[CH Up/Down] to select the channel which you
wish to copy to zone 128, then turn power OFF.
• CLEAR ? is displayed.
• Turn power OFF to cancel clearing.
3
Push [
W
] to clear the selected channel from
zone 128.
• “CLEARED” is displayed.
Clearing the tactical group in zone 128
— Zone clearing
1
Push [CH Up] or [CH Down], or rotate
py
,
p
2
While pushing [I] and [III], rotate [VOL] to turn
power ON.
• “COPY ?” is displayed.
• When all 512 channels are already used, the
transceiver has no capacity. “NOT COPY” is
displayed for 2 sec and error beeps sound.
• Turn power OFF to cancel copy.
3
Push [
W
] to copy the selected channel to zone
1
Push [CH Up] or [CH Down], or rotate
[CH Up/Down] to select a channel in zone 128,
then turn power OFF.
2
While pushing [I] and [III], rotate [VOL] to turn
power ON.
• “CLEAR ?” is displayed.
• Turn power OFF to cancel clearing.
3
Push [CH Up] or [CH Down], or rotate
[CH Up/Down] to select “ALL CLEAR ?”
3
Push [
W
] to copy the selected channel to zone
128.
• “COPIED” is displayed.
Creating the tactical group in zone 128
— Zone copy
1
Push [CH Up] or [CH Down], or rotate
[CH Up/Down] to select the channel belonging
to the zone which you wish to copy to zone 128,
[CH Up/Down] to select ALL CLEAR ? .
4
Push [
W
] to clear the zone data from zone 128.
• “ALL CLEARED” is displayed.
Cloning the tactical group
<Master (Zone 128)
➔
Sub (Zone 128)>
This operation enables the master transceiver to
clone its own tactical group in zone 128 to zone
128 of the sub transceiver.
y
py
,
then turn power OFF.
2
While pushing [I] and [III], rotate [VOL] to turn
power ON.
• “COPY ?” is displayed.
• When all 512 channels are already used, the
transceiver has no remaining capacity. “NOT
COPY” is displayed for 2 sec and error beeps are
emitted
128 of the sub transceiver.
▒
IMPORTANT!
▒
To perform the tactical group cloning, “Set
▒
mode access” must be enabled, and the dealer
▒
pass code must be entered.
1
Connect the two transceivers (master and sub)
with the optional zone copy cable. The
following zone copy cables are available;
emitted.
• Turn power OFF to cancel copy.
3
Push [CH Up] or [CH Down], or rotate
[CH Up/Down] to select “ZONE COPY ?”.
4
Push [
W
] to copy the selected zone data to
zone 128.
• “COPIED” is displayed.
▒
NOTE:
following zone copy cables are available;
• OPC-1870 : Used for the Handheld to
Handheld connection.
• OPC-1871 : Used for the Handheld to Mobile
connection.
52
▒
▒
When the transceiver does not have enough
▒
capacity to create the tactical group with zone
▒
copy, all channel data may not be copied
▒
completely.