![background image](http://html.mh-extra.com/html/icom/ic-f9011/ic-f9011_user-manual_611377013.webp)
3
Accessories
3-1
Supplied Accessory Attachments
Attach the supplied accessories as shown below.
Flexible antenna
Connect the supplied flexible antenna to the antenna connector.
CAUTION:
▒
• NEVER carry the transceiver by holding the antenna.
▒
• DO NOT connect the antenna other than those listed on 3-3-6
▒
Other Options.
▒
• Transmitting without an antenna may damage the transceiver.
Battery pack
To attach the battery pack:
Slide the battery pack on the back of the transceiver in
the direction of the arrow (
➊
), then lock it with the
battery release button.
• Slide the battery pack until the battery release button
makes a ‘click’ sound.
makes a click sound.
To release the battery pack:
Slide the battery release button in the direction of the
arrow (
➋
) as shown below. The battery pack is then
released.
▒
NEVER release or attach the battery pack when the
▒
transceiver is wet or soiled. This may result water or
▒
dust access to the transceiver/battery pack and may
▒
result in the transceiver being damaged
▒
result in the transceiver being damaged.
▒
NOTE: Keep the battery pack terminals clean. It’s a
▒
good idea to clean the battery pack terminals once a
▒
week.
Belt clip
To attach the belt clip:
①
Release the battery pack if it is attached.
①
y p
②
Slide the belt clip in the direction of the arrow until the belt clip
is locked and makes a ‘click’ sound.
To detach the belt clip:
①
Release the battery pack if it is attached.
②
Pinch the clip (
➊
), and slide the belt clip in the direction of
the arrow (
➋
).
Connector cover
Connector cover
Attach the connector cover when optional equipment is not used.
To attach the connector cover:
①
Insert the connector cover into the multi-connector.
②
Tighten the screw, using a Philips screwdriver.
▒
CAUTION:
▒
Attach the connector cover when the optional equipment
▒
is not used. Otherwise the terminals of the multi-connector may be
▒
h t d b
t l bj t t d thi
ld d
g th
13
▒
shorted by metal objects, etc., and this could damage the
▒
transceiver.
To detach the connector cover:
①
Unscrew the screw, using a Phillips screwdriver.
②
Detach the connector cover for the optional equipment connector.
Connector cover.