Icom IC-F70DS, Instruction Manual

Page: 24 / 48

20
4
BIIS OPERATION
D D
Group call
q
When a group call is received;
• Beeps sound.
• “
” appears and the mute is released.
• The programmed text message (e.g.“ GROUP ”) and the calling sta-
tion ID (or text) is displayed when the indication mode is 2 lines.
• The programmed text message (e.g.“ GROUP ”) and the calling
station ID (or text) is displayed alternately when the indication
mode is 1 line, depending on the setting.
• “ ” appears or blinks depending on the setting.
w
Push and hold [PTT], then speak into the microphone at a
normal voice level.
• TX indicator lights red.
NOTE: Only one station is permitted to speak.
e
Release [PTT] to return to receive.
• BUSY indicator lights green while receiving a signal.
r
To finish the conversation, push [MONITOR] (Moni(Audi))
to send the ‘Clear down’ signal.
• Either station can send a ‘Clear down’ signal.
• “
CLR DOWN
” is displayed for 2 sec. (approx.)
• “ ” disappears and the transceiver returns to the standby con-
dition.
D D
Displaying the received call record
— Queue indication
The transceiver memorizes the calling station ID in the mem-
ory. Up to 3 calls can be memorized, and the oldest call
record is erased when a 4th call is received. However, once
the transceiver is powered OFF, the all records are cleared.
q
Push and hold [P1] (Digital) for 1 sec.
• Displays following indication.
When a record is available
When no record is available
w
Push [Up] or [Down] to select the desired call.
e
Push and hold [P1] (Digital) for 1 sec. again to return to the
standby condition.
• When no operation is performed for 30 sec., the transceiver
returns to the standby condition automatically.
X
X
X
Appears Appears or blinks
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 20 (1,1)