Icom IC-F70DS, Instruction Manual

Page: 19 / 48

15
3
BASIC OPERATION
D
TX code number edit
(PMR or BIIS PMR operation only)
If the transceiver has [TX Code CH Select] or [TX Code
Enter] assigned to it, TX code contents can be edited within
the allowable digits.
USING [TX CODE CH SELECT] KEY:
q
Push [TX Code CH Select] to enter the TX code channel
selection mode.
• Select the desired channel before entering the TX code channel
selection mode if necessary.
w
Push and hold [TX Code CH Select] for 1 sec. to enter the
TX code edit mode.
e
Push [TX Code CH Select] to select the desired digit to be
edited.
• The digit to be edited blinks.
r
Push [CH Up], [CH Down] or 10-keypad* to set the desired
digit.
t
Push [TX Code CH Select] to set the digit. The digit to the
right will blink automatically.
• When the 10-keypad* is used for setting, the digit to the right will
blink automatically without pushing [TX Code CH Select].
y
Repeat
r
and
t
to input all allowable digits.
u
Push [Call] or [PTT] to transmit the edited TX code.
*IC-F70DT/T or IC-F80DT/T only
USING [TX CODE ENTER] KEY:
q
Select the desired TX code channel via [TX Code CH
[CH Up] or [CH Down], [TX Code CH Up] or [TX
Code CH Down].
w
Push [TX Code Enter] to enter the TX code edit mode.
e
Push [TX Code Enter] to select the desired digit to be edit-
ed.
• The digit to be edited blinks.
r
Push [CH Up], [CH Down] or 10-keypad* to set the desired
digit.
t
Push [TX Code Enter] to set the digit. The digit to the right
will blink automatically.
• When the 10-keypad* is used for setting, the digit to the right will
blink automatically without pushing [TX Code CH Enter].
y
Repeat
r
and
t
to input all allowable digits.
u
Push [Call] or [PTT] to transmit the edited TX code.
*IC-F70DT/T or IC-F80DT/T only
3
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 15 (1,1)