![background image](http://html1.mh-extra.com/html/icom/ic-f60v-series/ic-f60v-series_instruction-manual_4283916020.webp)
32
5
BATTERY CASE
33
5
BATTERY CASE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
■
Optional battery case (BP-226)
When using the optional battery case attached to the transceiver,
install 5
×
AA (LR6) size alkaline batteries as illustrated at right. The
BP-226 employs waterproof construction, which correspond to IPX4
of the international standard IEC 60529 (2001).
q
Hook your finger under the latch, and open the cover in the direc-
tion of the arrow (
q
). (Fig.1)
w
Then, install 5
×
AA (LR6) size alkaline batteries. (Fig.2)
• Install the alkaline batteries only.
• Be sure to observe the correct polarity.
• Do not pin the ribbon under the batteries.
e
Close the cover by fitting in the direction of the arrow (
w
) first,
then check the latch is in place (
e
). (Fig.1)
• Be sure the gasket and the ribbon are set correctly, and do not pro-
trude from the battery case. (Fig.3)
CAUTION:
• When installing batteries, make sure they are all the same
brand, type and capacity. Also, do not mix new and old batter-
ies together.
• Keep battery contacts clean. It’s a good idea to clean battery
terminals once a week.
• Never incinerate used battery cells since internal battery gas
may cause them to rupture.
• Never expose a detached battery case to water. If the battery
case gets wet, be sure to wipe it dry before using it.
q
w
e
BP-226
Latch
Fig.1
Fig.2
Ribbon
Fig.3
Gasket
Ribbon