![background image](http://html1.mh-extra.com/html/icom/ic-f60v-series/ic-f60v-series_instruction-manual_4283916008.webp)
8
2
PANEL DESCRIPTION
9
2
PANEL DESCRIPTION
2
SCAN B START/STOP KEY
➥
Push to start and cancel scanning operation. Scan resumes
after a specified time period has passed when scan is cancelled
except for this key.
➥
Push and hold this key for 1 sec. to indicate the scan group, then
select the desired group using [CH Up]/[CH Down].
SCAN ADD/DEL (TAG) KEY
➥
Push to add or delete the selected channel to/from the scan
group.
1. Push to indicate the scan group, then push [CH Up] or [CH Down]
to select the desired group.
2. Push to add or delete the channel to/from the selected scan group.
3. Push and hold for 1 sec. to exit the scan group selection mode.
➥
Push this key while scan is paused (a signal is detected) on a
channel (except for priority channel,) the channel is cleared from
the scan group.
Depending on the setting, the cleared channel is added to the
scan group again after the scan is cancelled. (Nuisance
Delete function)
PRIORITY CHANNEL KEYS
➥
Push to select Priority A or Priority B channel.
➥
Push and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] to set the
operating channel as the Priority A or Priority B channel.
MR-CH 1/2/3/4 KEYS
Push to select the memory channel 1 to 4 directly.
LOCK KEY
Push and hold to toggle the key lock function ON and OFF.
• All programmable keys except the following are electronically locked
when the key lock function is activated: [PTT], [Light], [Surveillance],
[Call] (incl. Call A and Call B), [Moni(Audi)] and [Emergency].
■
Programmable function keys
The following functions can be assigned to
[P0]
,
[P1]
,
[P2]
,
[P3]
,
[Red]
,
[
]
and
[
]
programmable function keys.
Consult your Icom dealer or system operator for details concerning
your transceivers programming.
If the programmable function names are bracketed in the following
explanations, the specific key is used to activate the function de-
pends on programming.
CH UP AND DOWN KEYS
➥
Push to select an operating channel.
➥
Push to select a transmit code channel after pushing [TX Code
CH Select].
➥
Push to select a DTMF channel after pushing [DTMF Autodial].
➥
Push to select a scan group after pushing and holding [Scan A
Start/Stop]/[Scan B Start/Stop].
ZONE SELECT KEY
Push this key, then select the desired zone using [CH Up]/[CH
Down].
What is “zone”?
—The desired channels are assigned into a
zone according to the intended use for grouping. For example,
‘Staff A’ and ‘Staff B’ are assigned into a “Business” zone, and
‘John’ and ‘Cindy’ are assigned into a “Private” zone.
SCAN A START/STOP KEY
➥
This key’s operation depends on the Power ON Scan setting.
When the power ON scan function is turned OFF;
Push to start and cancel scanning operation.
When the power ON scan function is turned ON;
Push to pause scanning, then resumes scanning after a speci-
fied time period has passed.
➥
Push and hold this key for 1 sec. to indicate the scan group, then
select the desired group using [CH Up]/[CH Down].