![background image](http://html1.mh-extra.com/html/icom/ic-f60v-series/ic-f60v-series_instruction-manual_4283916015.webp)
23
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
22
3
BASIC OPERATION
■
Recording function
(Depends on the version)
The transceiver has a recording function that records the TX/RX
voice messages. When the specified ID is received, the automatic
recording function activates and records the voice message for a
specified time period.
Or, if the transceiver has [Playback/Rec] assigned to it, manual
recording is also available.
Automatic recording:
q
When the specified ID is received, the recording function is au-
tomatically activated.
• “
” blinks.
w
While pushing and holding [PTT], speak into the microphone at a
normal voice level.
• The TX voice message is recorded.
e
Release [PTT] to receive.
• The RX voice message is recorded.
r
The recording operation automatically stops after the specified
time period has passed, exhausting the recording memory, op-
erating any key (except [PTT]), or transmitting a single tone.
• “
” stops blinking.
• Pushing [Playback/Rec] (if assigned) also stops recording.
Manual recording:
q
Push and hold [Playback/Rec] for 1 sec. to activate the recording
function.
• “
” blinks.
w
While pushing and holding [PTT], speak into the microphone at a
normal voice level.
• The TX voice message is recorded.
e
Release [PTT] to receive.
• The RX voice message is recorded.
r
Push [Playback/Rec] again to stop recording.
• “
” stops blinking.
• The recording operation stops at exhausting the recording memory,
operating any key (except [PTT]), or transmitting a single tone.
Playing back:
The recorded voice messages are played back with [Playback] or
[Playback/Rec].
• “
” appears on the function display when the unplayed message is in
the recording memory.
➥
Push [Playback] or [Playback/Rec] to playback the recorded
message in sequence from the newest one.
• Push [CH Up] or [CH Down] to select the desired message.
• A short beep is emitted after playing back each message.
• A long beep is emitted after playing back all messages.
• During playback mode, “
” appears when the unplayed message
is played back, or “
” disappears when the played message is
played back.
• “
” disappears after playing back the unplayed message for the
specified time period.
NOTE:
You can transmit the recording message with [PTT] while
playing back the message.
Deleting the message:
➥
While playing back the message, push and hold [Playback] or
[Playback/Rec] for 1 sec. to delete the playing back message.
➥
While pushing and holding [P0] and [CH Up], turn power ON to
delete all messages in the recording memory.