![background image](http://html.mh-extra.com/html/icom/ic-f51/ic-f51_instruction-manual_612606032.webp)
■
Transmitting a call
Total of a 3 ways for code selection are available—selecting the
call code from memory, entering the call code from the keypad and
calling back from the queue channel record.
D
Using call memory
q
While in the standby condition, push [P1] (Digital) to enter the
call code memory channel selection mode.
Call code text is displayed.
w
Push [
]/[
] to select the desired call code.
e
Push [P0] (Call) or [PTT]* to call.
* PTT call can be made only when PTT call capability is permitted.
NOTE:
When no answer back is received, the transceiver re-
peats the call 3 times (default) automatically, and “
”
is
displayed during each call. However, an error beep sounds
and “
”
is displayed when no answer back is received
after the calls.
r
Push [PTT] to transmit; release to receive.
t
Push [P3] (Moni(Audi)) to send the “Clear down” signal.
23
4
BIIS OPERATION
Summary of Contents for IC-F51
Page 1: ...INSTRUCTION MANUAL UHF TRANSCEIVER iF61 L P0 P1 P2 P3 ...
Page 62: ...MEMO ...
Page 63: ...MEMO ...