![background image](http://html.mh-extra.com/html/icom/ic-f51/ic-f51_instruction-manual_612606004.webp)
iii
Versions of the IC-F61-L which display the “EX” mark-
ing on the serial number seal.
The approval rating for these models are
II
2G Ex ib
II
A T3 Gb and
II
2D Ex tb
III
C T160°C Db IP67.
WARNING! NEVER
charge the BP-227AXD (with/without the
transceiver) in an explosive atmosphere. The optional battery char-
gers are not approved as Intrinsically Safe.
When the transceiver is used in a hazardous area, the BP-227AXD
MUST
be attached, either the jack cover or HM-138
MUST
be at-
tached to the speaker-microphone connector.
KEEP
the transceiver and the BP-227AXD clean to avoid any risk
of ignition due to the build-up of electrostatic charges.
Repair of Icom transceivers should only be carried out by autho-
rized Icom distributors. In particular, repair of ATEX approved
transceivers can
ONLY
be done by Icom to maintain the intrin-
sically safe rating.
NEVER
attempt to repair an ATEX approved
transceivers. Only Icom has the repair expertise and procedures to
maintain the ATEX approval. Contact your Icom distributor or au-
thorised dealer for details.
INTRINSIC SAFETY
The equipment can be used without the microphone but with the
jack cover.
Summary of Contents for IC-F51
Page 1: ...INSTRUCTION MANUAL UHF TRANSCEIVER iF61 L P0 P1 P2 P3 ...
Page 62: ...MEMO ...
Page 63: ...MEMO ...