![background image](http://html.mh-extra.com/html/icom/ic-f51/ic-f51_instruction-manual_612606022.webp)
■
Call procedure
When your system employs tone signalling (excluding CTCSS and
DTCS), the call procedure may be necessary prior to voice trans-
mission. The tone signalling employed may be a selective calling
system which allows you to call specific station(s) only and prevent
unwanted stations from contacting you.
q
Select the desired TX code channel or 5-tone code according to
your System Operator’s instructions.
• This may not be necessary depending on programming.
• Refer to pages 15 and 16 for selection.
w
Push the call switch (assigned to one of the dealer programma-
ble switches:
[P0], [P1], [P2],
[P3], [Red], [
]
and
[
]
).
e
After transmitting a 5-tone code, the remainder of your commu-
nication can be carried out in the normal fashion.
Selective calling
Non-selective calling
13
3
CONVENTIONAL OPERATION
Summary of Contents for IC-F51
Page 1: ...INSTRUCTION MANUAL UHF TRANSCEIVER iF61 L P0 P1 P2 P3 ...
Page 62: ...MEMO ...
Page 63: ...MEMO ...