![background image](http://html1.mh-extra.com/html/icom/ic-f3030-series/ic-f3030-series_instruction-manual_4259544010.webp)
5
2
PANEL DESCRIPTION
■
Programmable function keys
The following functions can be assigned to
[Emer]
,
[Side1]
,
[Side2]
,
[Side3]
,
[P0]
,
[P1]
,
[P2]
and
[P3]
programmable
function keys.
Consult your Icom dealer or system operator for details
concerning your transceivers programming.
If the programmable function names are bracketed in the
following explanations, the specific key is used to activate the
function depends on the programming.
CH UP AND DOWN KEYS
➥
Push to select an operating channel.
➥
Push to select a transmit code channel after pushing [TX
Code CH Select].
➥
Push to select a DTMF channel after pushing [DTMF
Autodial].
➥
Push to select a scan group after pushing and holding
[Scan A Start/Stop]/[Scan B Start/Stop] for 1 second.
SIREN KEY
Push to emit a siren.
ZONE KEY
Push this key, then push [CH Up] or [CH Down] to select the
desired zone.
What is “zone”?
— The desired channels are assigned
into a zone according to the intended use for grouping.
For example, ‘Staff A’ and ‘Staff B’ are assigned into a
“Business” zone, and ‘John’ and ‘Cindy’ are assigned into
a “Private” zone.
SCAN A KEY
➥
This key’s operation depends on the Power ON Scan
setting.
When the power ON scan function is turned OFF:
Push to start and cancel scanning operation. In case of
transmission during scan, scanning will be cancelled.
When the power ON scan function is turned ON:
Push to pause scanning, then resumes scanning after
passing a specified time period. In case of transmission
during scan, scanning will be cancelled.
➥
Hold down this key for 1 second to indicate the scan group,
then push [CH Up] or [CH Down] to select the desired
group.
SCAN B KEY
➥
Push to start and cancel scanning operation. In case of
transmission during scan, scanning will be paused. Then
resumes scanning after passing a specified time period.
➥
Hold down this key for 1 second to indicate the scan group,
then push [CH Up] or [CH Down] to select the desired
group.
PRIO A/B KEYS
➥
Push to select Priority A or Priority B channel.
➥
Hold down [Prio A (Rewrite)] or [Prio B (Rewrite)] for 1
second to reassign the operating channel to Priority A or
Priority B channel.
Summary of Contents for IC-F3030 Series
