![background image](http://html1.mh-extra.com/html/icom/ic-f29dr3/ic-f29dr3_basic-manual_4225097003.webp)
2
ENGLISH
Icom and the Icom logo are registered trademarks of Icom Incorporated
(Japan) in Japan, the United States, the United Kingdom, Germany, France,
Spain, Russia, Australia, New Zealand, and/or other countries.
AMBE+2 is a trademark and property of Digital Voice Systems Inc.
All other products or brands are registered trademarks or trademarks of their
respective holders.
PRECAUTIONS
R
WARNING! NEVER
use or charge Icom battery packs
with non-Icom transceivers or non-Icom chargers. Only Icom
battery packs are tested and approved for use with Icom
transceivers or charged with Icom chargers. Using third-
party or counterfeit battery packs or chargers may cause
smoke, fire, or cause the battery to burst.
R
WARNING! NEVER
hold the transceiver so that the
antenna is very close to, or touching exposed parts of the
body, especially the face or eyes, while transmitting.
R
WARNING! NEVER
operate the transceiver with a
headset or other audio accessories at high volume levels.
The continuous high volume operation may cause a ringing
in your ears. If you experience the ringing, reduce the
volume level or discontinue use.
CAUTION: DO NOT
short the terminals of the battery pack.
Shorting may occur if the terminals touch metal objects
such as a key, so be careful when placing the battery packs
(or the transceiver) in bags, and so on. Carry them so that
shorting cannot occur with metal objects. Shorting may
damage not only the battery pack, but also the transceiver.
CAUTION: DO NOT
use harsh solvents such as Benzine or
alcohol when cleaning. This could damage the equipment
surfaces. If the surface becomes dusty or dirty, wipe it clean
with a soft, dry cloth.
CAUTION: DO NOT
place or leave the transceiver in
excessively dusty environments. This could damage the
transceiver.
NOTE: DO NOT
place or leave the transceiver in areas
with temperatures below –25°C or above +55°C, or in areas
subject to direct sunlight, such as the dashboard.
NEVER
place the transceiver in an insecure place to avoid
inadvertent use by unauthorized persons.
BE CAREFUL!
The transceiver meets IP67* requirements
for dust tight and waterproof protection. However, once
the transceiver has been dropped, dust protection and
splash resistance cannot be guaranteed due to the fact
that the transceiver may be cracked, or the waterproof seal
damaged, and so on.
* Only when the jack cover, the optional HM-222HLWP,
HS-94LWP, or HS-95LWP is attached.