![background image](http://html1.mh-extra.com/html/icom/ic-e92d/ic-e92d_instruction-manual_4188898096.webp)
New
88
10
SCAN OPERATION
New2001
t
Push and hold
[S.MW](MR)
for 1 sec. to store the skip
condition into the memory.
• “SKIP” or “PSKIP” indicator appears, according to the skip se-
lection in the step
r
.
✔
CONVENIENT!
The skip setting can be set with the following operation.
q
Select the desired memory channel to be set as a skip
channel/frequency.
w
While pushing
[SKIP](5)
, rotate
[DIAL]
to select the skip
condition from “PSKIP,” “SKIP” and “OFF
(no indication)
.”
✔
CONVENIENT!
During VFO scanning, such as programmed scan, the skip
setting can be programmed into the highest blank memory
channel which is automatically selected with the following
operation.
q
Start the VFO scan.
➥
Push
[VFO]
to select VFO mode.
• Select the desired frequency band with
[BAND]
, if desired.
➥
Set the squelch level.
➥
While pushing and holding
[SCAN](2)
, rotate
[DIAL]
to
select the desired scan type.
• “ALL” for full scan; “BAND” for band scan, “P-LINK” for
programmed link scan, “PROG-xx (or scan name if pro-
grammed)” for programmed scan (xx= 0 to 24; programmed
scan edges numbers are only displayed), “DUP” for duplex
scan.
➥
To start the scan, release
[SCAN](2)
.
• Scan pauses when a signal is received.
• Rotate
[DIAL]
to change the scanning direction, or resumes
manually.
w
When scan pauses and you want to set the paused fre-
quency as a skip frequency.
➥
Push and hold
[SKIP](5)
for 1 sec. to store the paused
frequency into the highest blank memory channel.
• While pushing and holding
[SKIP](5)
, scan pauses; and
when releasing
[SKIP](5)
scan resumes.
FM
FM
A
µ
SKIP
SKIP
033
033
14
145 700
700
FM
FM
A
µ
PSKI
PSKIP
033
033
14
145 700
700
• Skip channel setting
• Program skip setting
“SKIP” appears
“PSKIP” appears