![background image](http://html1.mh-extra.com/html/icom/ic-e92d/ic-e92d_instruction-manual_4188898009.webp)
1
1
ACCESSORY ATTACHMENT
1
■
Antenna
Insert the supplied antenna into the
antenna connector and screw down
the antenna as shown at left.
NEVER
carr y the transceiver by
holding the antenna.
KEEP
the jack cover attached when
jack is not in use to protect the con-
nector from dust and water.
✔
For your information
Third-party antennas may increase transceiver perform-
ance. An optional AD-92SMA
ANTENNA
CONNECTOR
ADAPTER
is available to connect an antenna with a BNC
connector.
■
Belt clip
■
Hand strap
Slide the hand strap through the
loop on the top of the belt clip as
illustrated at left to facilitate carrying
the transceiver.
■
Battery pack
Attach the Li-Ion battery pack
(BP-256)
or battery case
(BP-257)
as illustrated below.
• Charge the Li-Ion battery pack before use. (pgs. 10, 11)
Jack cover
Handstrap
Supplied screws*
*NOTE:
USE
the supplied screws
only. Using screws longer
than specified could damage
the transceiver.
q
w
Battery pack/Battery case
Latch
CAUTION!:
NEVER
attach or detach the battery
pack when wet.
Be careful
when releasing the latch.
Because the latch is tightly locked,
don’t use a finger nail to open it—
you may injure yourself. Instead, use
something relatively flat, like the
edge of a coin or the tip of a
screwdriver, to carefully release the
latch.