![background image](http://html1.mh-extra.com/html/icom/ic-e92d/ic-e92d_instruction-manual_4188898061.webp)
53
7
DV MODE OPERATION
New2001
7
D
Message Transmission
Toggle the message transmission function ON
(Ch01–05)
and
OFF. When a message channel is selected, the transceiver
transmits a text message
(pre-programmed)
. (default:
OFF)
q
Set the operating frequency, call signs and other settings,
such as repeater operation, as desired in B band.
w
Perform the steps
q
to
e
in “
D
TX message program-
ming” as at left.
e
Rotate
[DIAL]
†
to select the desired message channel.
• “Ch01” to “Ch05” available.
• See left-hand pages for message programming.
r
Push
[
](5)
to set the message for transmission.
t
Push
[PTT]
to transmit the selected message.
• The message is transmitted each time [PTT] is pushed.
•
The message is transmitted each 30 sec. automatically during
continuous transmission.
y
Release
[PTT]
to return to receive.
u
When the reply call with a message is received, the call
sign and the message scrolls at the bottom of the function
display.
✔
For your information
The automatic received call sign and/or message indication
can be turned OFF in display set mode, if desired.
➥
RX CALL SIGN
(p. 113)
➥
RX MESSAGE
(p. 113)
NOTE:
Only one message can be stored in the IC-E92D.
The received message is cleared by turning power OFF,
or overwritten when another message is received.
A transmitted message that includes lower case charac-
ters from the IC-E92D may not be decoded and displayed
correctly by the IC-V82/U82, etc.
†
[DIAL]
↔
[ ](2)
/
[ ](8)
‡
[
](5)
↔
[ ](6)
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19
DV
DV
B
43
430 712
712
50
50
MSG:Hello!
MSG:Hello!
Scrolls the received message.