38
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
D
1UICK4UNINGFUNCTION
The operating frequency can be changed in ‘kHz’ or
‘MHz’ steps for quick tuning.
Select the desired tuning step in each operating fre-
quency band and mode.
q
Push [TS] to select the ‘kHz’ or ‘MHz’ Quick Tuning
function step, or turn it OFF.
s7HILETHEQUICKTUNINGICONh
Z
,” is displayed above the
1 kHz or 1 MHz digit, the frequency will be changed in
‘kHz’ or ‘MHz’ steps.
s7HENTHEFUNCTIONIS/&&THEFREQUENCYWILLBECHANGED
in 10 Hz steps.
w
Rotate [MAIN DIAL] to change the frequency in the
selected steps.
./4%
s4OTURN/&&THE1UICK4UNINGFUNCTIONPUSH;43=
again. (“
Z
” disappears)
s7HENTHE1UICK4UNINGFUNCTIONIS/&&THEFRE
-
quency will be changed in 10 Hz steps.
D
3ELECTING
‘
K(Z
’
STEP
When the ‘kHz’ quick tuning is selected, the frequency
can be changed in the selected ‘kHz’ steps.
The MAIN and SUB Bands use the common ‘kHz’ tun-
INGSTEP9OUCANSELECTITINBOTH"ANDS
q
Push [TS] to turn ON the Quick Tuning function.
sh
Z
” appears.
w
Hold down [TS] for 1 second to display the “TS”
screen to select the quick tuning step.
e
Select the desired operating mode.
r
Rotate [MAIN DIAL] to select the desired ‘kHz’ step.
sANDK(ZARE
selectable.
s(OLDDOWN;&=FORSECONDTORETURNTOTHEDEFAULTSET
-
ting, if desired.
t
Repeat steps
e
and
r
to select quick tuning steps
for other modes.
y
Push [TS] to exit the “TS” screen.
./4%
To display the “TS” screen, the Quick Tuning
function must be turned ON first.
[TS]
[MAIN DIAL]
1 k H z
S S B
TS
Appears
[TS]
[F-3]
Mode selection
[MAIN DIAL]
