118
8
DV MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
N
$63ETMODEDESCRIPTION
The DV Set mode is used for programming infrequently
changed values or functions in the DV mode.
D
DV
3ETMODESETTINGS
q
In the DV mode, push [MENU] one or more times to
display the “M3” screen (Menu 3).
s)NTHE$2MODEP
ush [MENU] once or twice to select
the “D1” screen.
w
Push [DSET](F-5) to display the “DSET” screen.
e
Push [SET](F-5) to enter the DV Set mode.
r
Push [
Y
](F-1) or [
Z
](F-2) to select the desired
item.
t
Rotate [MAIN DIAL] to select the desired option.
s(OLDDOWN
[F-3]
for 1 second to reset to the default set-
ting, if desired.
y
Push [MENU] to save, and return to the “DSET”
screen.
3TANDBY"EEP
1.
$EFAULT/.
Turn the Standby beep function ON or OFF.
This function sounds a beep when the other station
stops transmitting.
s/&& 4URNS/&&THEFUNCTION
s/. 4URNS/.THEFUNCTIONTOSOUNDABEEP
s/. 4URNS/.THEFUNCTIONTOSOUNDABEEP
If the call was sent to your own call sign, the
beep has a higher pitch.
!UTO2EPLY
2.
$EFAULT/&&
Turn the automatic reply function ON or OFF.
This function automatically replies to a call addressed
to your own call sign, even if you are away from the
transceiver.
This function is automatically turned OFF after you
push [PTT] (microphone) or [TRANSMIT].
s/&& 4URNS/&&THEFUNCTION
s/. 4HETRANSCEIVERAUTOMATICALLYREPLIESTOTHE
call with your own call sign.
$6$ATA48
3.
$EFAULT044
For low-speed data communication, select whether to
transmit the input data manually or automatically.
s044 0USH;044=MICROPHONE OR;42!.3-)4=TO
manually transmit the input data.
s!UTO 7HENDATAISINPUTFROMA0#THROUGHTHE
[DATA1] jack, the transceiver automatically
transmits it.
$IGITAL-ONITOR
4.
$EFAULT!UTO
Select the RX monitoring mode by holding down [XFC]
while in the DV mode.
s!UTO
Monitors in the DV mode or FM mode, de-
pending on the received signal.
s$IGITAL -ONITORSINTHE$6MODE
s!NALOG-ONITORSINTHE&-MODE
$IGITAL2043ET
5.
$EFAULT/.
Turn the digital repeater setting function ON or OFF.
When accessing a repeater that has a call sign dif-
ferent than the transceiver’s “R1” setting, this function
reads the repeater’s downlink signal and automatically
sets the correct repeater call sign into “R1.”
s/&& 4URNS/&&THEFUNCTION
s/. !UTOMATICALLYSETSTHEREPEATERCALLSIGN
28#ALL3IGN7RITE
6.
$EFAULT/&&
Turn the RX call sign automatic write function ON or
OFF.
When receiving a call addressed to your own call sign,
this function automatically sets the call sign of the call-
ing station into “UR.”
While in the DR mode, this function is disabled.
s/&& 4URNS/&&THEFUNCTION
s!UTO !UTOMATICALLYSETSTHECALLSIGNOFTHECALLING
station into “UR.”
1
O N – 1
Standby Beep
SET
Select the item
Reset to the default
setting
Displays the DV Set mode
item name and number
Displays the option
[MAIN DIAL]
[MENU]
[DSET]/[SET]
[
] [
]
