Icom IC-9100 Instruction Manual Download Page 14

Page: 14 / 212

MODE SWITCHES

Push to select your desired operating mode. (p. 43)

s4HEBUILTINSPEECHSYNTHESIZERANNOUNCESTHESELECTED

mode when the “SPEECH [MODE] SW” item is set to
“ON” in the Set mode. (p. 164)

;33"=

(p. 47)

Push to alternately select the USB or LSB modes.

sh53"vORh,3"vAPPEARS

the

SSB mode, hold down for 1 second to se-

lect

the

SSB data mode (USB-D, LSB-D).

” appears in addition to “USB” or “LSB.”

In the SSB data mode, push to return to the normal

SSB mode.

[CW/RTTY]

(pp. 48, 56)

0USH TO ALTERNATELY SELECT THE #7 OR 2449

modes.

sh#7vORh2449vAPPEARS

Hold down for 1 second to switch between

the

CW and CW-R

(CW reverse)

modes, in

the

mode.

sh#72vAPPEARSWHENTHE#7REVERSEMODEIS

selected.

Hold down for 1 second to switch between the

2449AND244922449REVERSE MODESIN
THE2449MODE

sh24492vAPPEARSWHENTHE2449REVERSEMODEIS

selected.

[AM/FM]

(p. 61)

Push to alternately select the AM or FM modes.

sh!-vORh&-vAPPEARS

Hold down for 1 second to select the AM or FM

data mode (AM-D/FM-D).

” appears in addition to “AM” or “FM.”

In the data mode, push to return to the normal

AM or FM mode.

./4%

s)NTHE!-MODEYOUCANTRANSMITONONLYTHE

HF/50MHz frequency bands.

s4HE!-MODECANNOTBESELECTEDONTHE

MHz frequency band.

;$6s$2=

(p. 85)

Push to select the DV mode.

sh$6vAPPEARS

Hold down for 1 second to select the DR mode.

” appears.

In the DR mode, push to cancel it.

” disappears.

FILTER SWITCH [FILTER]

(p. 73)

Push to select one of three IF filter settings ( / /

s4HESELECTEDlLTERPASSBANDWIDTHANDSHIFTINGVALUE

are displayed for 2 seconds on the LCD display.

Hold down for 1 second to display the “FIL”

screen (Filter) to set the filter passband width.

When the “FIL” screen is displayed, hold down for

1 second to return to the previous screen display.

TRANSMIT FREQUENCY CHECK SWITCH [XFC]

During split frequency or repeater operation, hold

down to listen to the transmit frequency. (p. 82)

s7HILE HOLDING DOWN THIS SWITCH THE TRANSMIT FRE

quency can be changed with the main dial, keypad
or memo pad.

s7HEN THE SPLIT LOCK FUNCTION IS TURNED /. PUSH

[XFC]

to cancel the dial lock function. (pp. 82, 162)

When the RIT function is turned ON, hold

down to listen to the receive frequency. (RIT is
temporarily cancelled.) (p. 69)

When the

∂

TX function is turned ON, hold down

to listen to the transmit frequency (including

∂

frequency offset). (p. 81)

In the simplex operation, hold down to listen to

the receive frequency.

s4HESQUELCHISCLOSEDANDTHEINTERFERENCEREJECT

function is temporary OFF while holding down this
switch.

In the DV mode, the RX monitoring mode is se-

lected by holding down this switch. (p. 118)

Front panel (continued)

PANEL DESCRIPTION

#2#3#4 #5 #6 #7

Summary of Contents for IC-9100





















































































































































































































Search results

Summary of Contents for IC-9100

Reviews:

Brands by name

Popular brands

Icom IC-9100, Instruction Manual

Search results

Summary of Contents for IC-9100

Reviews:

Brands by name

Popular brands