97
8
DV MODE OPERATION
N
#OPYINGTHECALLSIGN
D
#OPYINGTHECALLSIGNMEMORYCONTENTS
The memorized UR call sign can be copied into an-
other call sign memory.
./4%
First, make sure that the “Edit Record” item is set to
“Auto” or “Select” in the DV Set mode. (p. 119)
q
Push [DV
s
DR] to select the DV mode.
w
Push [MENU] one or more times to display the “M3”
screen (Menu 3).
s)NTHE$2MODEP
ush [MENU] once or twice to select
the “D1” screen.
e
Push [CS](F-1) to display the “CS” screen (Call
Sign).
r
Push [
Z
](F-1) to display the “UR” screen.
t
Rotate [MAIN DIAL] to select the desired UR call
sign channel to be copied.
s5TO5CANBESELECTED
y
Push [EDT](F-3) to enter the call sign programming
mode.
s4HESTDIGITOFTHESELECTEDCALLSIGNBLINKS
The displayed contents from step
u
are different,
depending on the “Edit Record” item setting. (p. 119)
7HENTHEh%DIT2ECORDvITEM
ISSETTOh!
uto
v
A blank channel is automatically selected, and the
call sign channel’s data, selected in step
t
above,
is displayed.
u
Edit the displayed call sign as described in page
86.
i
Push [MENU] to store the edited call sign into
the channel.
./4%
If there are no blank channels in the sta-
tion call sign memory, “Full” appears instead of
the channel number. In this case, follow the steps
in ‘When the “Edit record” item is set to “Select”,’
as shown below.
7HEN
the
h%DIT2ECORDvITEMISSETTO
h3ELECTv
The selected call sign channel’s data is displayed.
u
Edit the displayed call sign as described in page
86.
i
Push [MENU] to set.
o
Rotate [MAIN DIAL] to select the desired call
sign channel to store the data in.
!0
Hold down [SET](F-5) for 1 second to store or
overwrite the edited call sign into the selected
channel.
[
√
] [CD]
[CLR]
[MENU]
[DV
・
DR]
[MAIN DIAL]
CS
C D
R > C S
U R
DSET
M3
CS U
R
CQCQCQ
J A 3 Y U A
M
Y
R
1
R
2
NOT USE
Ú
UR
U06
J G 3 Y M K
D E L
S P C
UR
U01
J G 3 Y M L
( J G 3 Y M K )
S E T
UR
U01
C L R
J G 3 Y M K
E D T
G R P
S E T
UR
U01
J G 3 Y M
D E L
S P C
Rotate [MAIN DIAL]
UR
UR
C L R
C Q C Q C Q
E D T
N A M E
G R P
When the “Edit Record” item is set to “Auto.”
When the “Edit Record” item is set to “Select.”