Icom IC-7610 Advanced Manual Download

Page: 52 / 101

4. VOICE RECORDER FUNCTIONS

Deleting iles

Display the PLAY FILES screen.

MENU

» RECORD >

Play Files

Select the folder that the file you want to delete is
saved.

3. Touch the file that you want to delete for 1

second.

• The QUICK MENU is displayed.

4. Touch “Delete.”

If you want to delete all iles in the selected

folder, touch “Delete All.”

• “Delete File?” is displayed.

Touch [YES].

•

The ile is deleted and returns to the previous screen.

To close the PLAY FILES screen, push

EXIT

several times.

Deleting folders

Display the PLAY FILES screen.

MENU

» RECORD >

Play Files

Touch the folder you want to delete for 1 second.

• The QUICK MENU is displayed.

3. Touch “Delete.”

If you want to delete all folders, touch “Delete
All Folders.”

• “Delete Folder?” is displayed.

Touch [YES].

• The folder is deleted and returns to the previous
screen.

To close the PLAY FILES screen, push

EXIT

several times.

Summary of Contents for IC-7610






































































































Search results

Summary of Contents for IC-7610

Reviews:

Related manuals for IC-7610

Brands by name

Popular brands

Icom IC-7610, Advanced Manual

Search results

Summary of Contents for IC-7610

Reviews:

Related manuals for IC-7610

Brands by name

Popular brands