Icom IC-7610 Advanced Manual Download Page 46

Page: 46 / 101

3. ADVANCED SCOPE OPERATION

Waveform Color (Current)

(Default: (R) 217 (G) 241 (B) 247)

Set the waveform color for the currently received
signals.

Touch and select the R (Red), G (Green) or B

(Blue) scale, and then rotate

MULTI

to adjust the

ratio from 0 to 255.

The color is displayed in the box above the RGB
scale.

Waveform Color (Line)

(Default: (R) 70 (G) 30 (B) 0)

Set the waveform outline color for the currently
received signals.

Touch and select the R (Red), G (Green) or B

(Blue) scale, and then rotate

MULTI

to adjust the

ratio from 0 to 255.

The color is displayed in the box above the RGB
scale.

Waveform Color (Max Hold)

(Default: (R) 58 (G) 110 (B) 147)

Set the waveform color for the received signals
maximum level.

Touch and select the R (Red), G (Green) or B

(Blue) scale, and then rotate

MULTI

to adjust the

ratio from 0 to 255.

The color is displayed in the box above the RGB
scale.

Waterfall Display

(Default: ON)

Turn the Water fall display ON or OFF for the normal
scope or Mini scope screens.

On the Expanded scope screen, the Waterfall is
always displayed.

• OFF: Turns OFF the Waterfall display.
• ON:

Turns ON the Waterfall display.

Waterfall Speed

(Default: Mid)

Select the Waterfall speed.

• Slow: Sets the waterfall speed to Slow.
• Mid:

Sets the waterfall speed to Mid.

• Fast: Sets the waterfall speed to Fast.

Waterfall Size (Expand Screen)

(Default: Mid)

Select the Waterfall height in the Expand scope screen.

• Small: The same height as the Normal scope

screen, only the FFT scope expands.

• Mid:

The Waterfall height expands at the same
ratio as the FFT scope.

• Large: Only the Waterfall height expands.

SCOPE SET screen (Continued)

Waterfall Peak Color Level

(Default: Grid 10)

Select the signal level that the Waterfall displays a
peak color.
Higher signal levels are Red, Yellow, Green, Light-
blue, Blue and Black, in that order.

• Selection: Grid 1 ~ Grid 10

Waterfall Marker Auto-hide

(Default: ON)

Set the Waterfall Marker Auto-hide function to ON or
OFF.

• OFF: The marker in the Waterfall zone stays ON.
• ON:

The marker in the Waterfall zone is hidden
2 seconds after it is in place.

Dual Scope Type

(Default: Over/Under)

When the Dual scope is selected, select the Main and
Sub scope layout.

• Over/Under: Displays the Main scope over the

Sub scope.

• Side by Side: Displays the Main and Sub scopes

side by side.

Dual Scope Auto Select

(Default: ON)

When the Dual scope is selected, by selecting the

band (MAIN or SUB) simultaneously switches the

Main or Sub scope.

• OFF: The Main scope and Sub scope are not

switched by selecting the Main band or Sub
band.

• ON:

The Main scope and Sub scope are
switched by selecting the Main band or Sub
band.

Continued on the next page

Summary of Contents for IC-7610






































































































Search results

Summary of Contents for IC-7610

Reviews:

Brands by name

Popular brands

Icom IC-7610, Advanced Manual

Search results

Summary of Contents for IC-7610

Reviews:

Brands by name

Popular brands