Icom IC-7610 Advanced Manual Download Page 50

Page: 50 / 101

4. VOICE RECORDER FUNCTIONS

Playing back a recorded audio on a PC

You can also playback the voice memory data on a

PC.

The recorded information (frequency, date, and so on) is

not displayed.

1. Insert the SD card into your PC.

NOTE:

• The operations while playing back may differ, depending

on the application. Refer to the application’s instruction

manual for details.

•

When the ile does not playback, after double-clicking

the ile, download an appropriate software.

(Example: Windows Media

Player)

LOCK

SD card

Memory card
reader

Open the “Voice” folder.

3. Open the folder where the file you want to

playback is saved.

The folders are titled based on the recorded date.

(yyyymmdd)

IC-7610

Capture

Decode

Psk

yyyymmdd

Rtty

Setting

Voice

VoiceTx

4. Double-click file that you want to play back.

• The audio starts playing back.

The iles are titled based on the date and time

(yyyymmdd_hhmmss.wav).

(Example: 20171001_120255.wav)

Summary of Contents for IC-7610






































































































Search results

Summary of Contents for IC-7610

Reviews:

Brands by name

Popular brands

Icom IC-7610, Advanced Manual

Search results

Summary of Contents for IC-7610

Reviews:

Brands by name

Popular brands