background image

17

2. ADVANCED OPERATIONS

Operating RTTY

 (FSK)

The IC-7610 has a built-in RTTY decoder and 
encoder. Using a USB keyboard and the contents 
set in the RTTY TX memory, you can do basic RTTY 
operations without using an external device or 
software.

L

 If you are using PSK software, refer to the software manual.

RTTY DECODE screen <MENU1>

RTTY DECODE screen <MENU2>

Key

Action

<MENU1>
<MENU2>

Selects the Function menus.

HOLD/ 

CLR

Touch

Turns the Hold function ON or OFF.

 

•  “

HOLD

” is displayed, and the 

RTTY DECODE screen stops.

Touch 
1 sec.

Clears the displayed characters.

 

•  While the Hold function is ON, 

this clears the characters and 
cancels the Hold function.

TX MEM Opens the RTTY MEMORY screen.

ADJ

Opens the THRESHOLD screen.
You can adjust the threshold level.

 

•  Checking the RTTY DECODE, rotate 

MAIN DIAL

 to adjust the threshold level to 

where the characters are not displayed 
by noise.

DEF

Touch 
1 sec.

Resets the Threshold level to the 
default.

L

 The [DEF] key is displayed 
when after touching [ADJ].

MAIN/SUB

Changes between the Main or Sub band 
RTTY DECODE screen.

EXPAND Selects the Expanded or Normal screen.

LOG

Displays the RTTY DECODE LOG screen.

 

 Starts/Stops logging, selects the ile 

type or the time stamp.

LOG 

VIEW

Displays the RTTY DECODE LOG VIEW 
screen.

 

You can check the saved RTTY log iles.

SET

Displays the RTTY DECODE SET 
screen.

Summary of Contents for IC-7610






































































































Reviews: