![background image](http://html.mh-extra.com/html/icom/ic-756pro-iii/ic-756pro-iii_instruction-manual_612290074.webp)
72
9
SET MODE
■
Miscellaneous (others) set mode
(continued)
CI-V baud rate
This item sets the data transfer rate. 300, 1200, 4800,
9600, 19200 bps and “AUTO” are available.
When “AUTO” is selected, the baud rate is automati-
cally set according to the connected controller or re-
mote controller.
A
AU
UT
TO
O
Auto baud rate
(default)
1
19
92
20
00
0
19200 bps
CI-V address
To distinguish equipment, each CI-V transceiver has
its own Icom standard address in hexadecimal code.
The IC-756PRO’s address is 5Ch.
When 2 or more IC-756PRO’s are connected to an
optional CT-17
CI
-
V LEVEL CONVERTER
, rotate the tun-
ing dial to select a different address for each
IC-756PRO in the range 01h to 7Fh.
5
5C
Ch
h
Address of 5Ch
(default)
7
7F
Fh
h
Address of 7Fh
CI-V transceive
Transceive operation is possible with the IC-756PRO
connected to other Icom HF transceivers or receivers.
When “ON” is selected, changing the frequency, op-
erating mode, etc. on the IC-756PRO automatically
changes those of connected transceivers (or re-
ceivers) and vice versa.
O
ON
N
Transceive ON
(default)
O
OF
FF
F
Transceive OFF
CI-V with IC-731
When connecting the IC-756PRO to the IC-735 for
transceive operation, you must change the operating
frequency data length to 4 bytes.
• This item must be set to “ON” only when operating trans-
ceiver with the IC-735.
O
ON
N
4 bytes of frequency data
O
OF
FF
F
5 bytes of frequency data
(default)
Mic Up/Down Speed
This item sets the rate at which frequencies are
scanned when the microphone [UP]/[DN] switches
are pushed and held. High or low can be selected.
H
HI
IG
GH
H
High speed (default,
50 tuning steps/sec.)
L
LO
OW
W
Low speed
(25 tuning steps/sec.)