![background image](http://html.mh-extra.com/html/icom/ic-756pro-iii/ic-756pro-iii_instruction-manual_612290005.webp)
i
RF GAIN CONTROL/SQUELCH CONTROL
[RF/SQL] (outer control)
Adjusts the RF gain and squelch threshold level.
The squelch removes noise output from the speaker
(closed condition) when no signal is received.
• The squelch is particularly effective for FM. It is also
available for other modes.
• 12 to 1 o’clock position is recommended for any setting
of the [RF/SQL] control.
• The control can be set as ‘Auto’ (RF gain control in SSB,
CW and RTTY; squelch control in AM and FM) or
squelch control (RF gain is fixed at maximum) in set
mode as follows. (p. 68)
• When setting as RF gain/squelch control
While rotating the RF gain control, noise may be
heard. This comes from the DSP unit and does not
indicate an equipment malfunction.
o
RF POWER CONTROL [RF POWER]
Continuously varies the RF output power from min-
imum (5 W*) to maximum (100 W*).
* AM mode: 5 W to 40 W
!0
BALANCE CONTROL [BAL] (inner control; p. 31)
Adjusts the audio output balance between main and
sub readout frequencies while in dualwatch.
!1
NOISE REDUCTION LEVEL CONTROL [NR]
(outer control; p. 27)
Adjusts the noise reduction level when the noise re-
duction is in use. Set for maximum readability.
!2
NOISE REDUCTION SWITCH [NR] (p. 27)
Toggles the noise reduction ON and OFF.
!3
NOISE BLANKER SWITCH [NB] (p. 27)
Toggles the noise blanker ON and OFF. The noise
blanker reduces pulse-type noise such as that gen-
erated by automobile ignition systems. This function
cannot be used for FM, or non-pulse-type noise.
!4
S/RF METER (p. 36)
Shows the signal strength while receiving. Shows
the relative output power, SWR, ALC or compres-
sion levels while transmitting.
!5
MONITOR SWITCH [MONITOR] (p. 35)
Monitors your transmitted IF signal.
• The CW sidetone functions when [MONITOR] is OFF in
CW mode.
!6
ANTENNA TUNER SWITCH [TUNER] (p. 48)
➥
Turns the antenna tuner ON and OFF (bypass)
when pushed momentarily.
➥
Starts to tune the antenna manually when
pushed for 2 sec.
• When the tuner cannot tune the antenna, the tuning
circuit is bypassed automatically after 20 sec.
Noise blanker OFF
Noise blanker ON
NB
NB
Noise reduction OFF
Noise reduction ON
NR
NR
BAL
NR
Decreases
OFF
Increases
BAL
NR
Increases main
readout gain
Increases sub
readout gain
RF POWER
Increases
Decreases
MODE
SSB, CW
RTTY
AM, FM
AUTO
RF GAIN
SQL
SQL
SET MODE SETTING
SQL
SQL
RF GAIN + SQL
RF GAIN + SQL
RF GAIN + SQL
Recommended level
Minimum RF gain
Adjustable
range
RF gain
adjustable
range
Maximum
RF gain
Maximum
RF gain
Squelch is
open.
S-meter
squelch
S-meter squelch
threshold
Noise squelch
threshold
(FM mode)
Shallow
Deep
S-meter
squelch
Noise squelch (FM mode)
Noise squelch (FM mode)
Squelch is
open.
3
2
PANEL DESCRIPTION
• When functioning as RF gain control
(Squelch is fixed open; SSB, CW, RTTY only)
• When functioning as squelch control
(RF gain is fixed at maximum.)