![background image](http://html.mh-extra.com/html/icom/ic-756pro-iii/ic-756pro-iii_instruction-manual_612290015.webp)
!2
ANTENNA CONNECTOR 1 [ANT1]
!3
ANTENNA CONNECTOR 2 [ANT2] (pgs. 14, 15)
Accept a 50
Ω
antenna with a PL-259 connector.
When using an optional AH-4
HF/50 MHz AUTO-
MATIC ANTENNA TUNER
or AH-3
HF AUTOMATIC AN-
TENNA TUNER
, connect it to the [ANT1] connector.
The internal antenna tuner activates for [ANT2] and
deactivates for [ANT1] when connecting the AH-4 or
AH-3.
D
ACC SOCKETS
!4
GROUND TERMINAL [GND] (pgs. 14, 15)
Connect this terminal to a ground to prevent electri-
cal shocks, TVI, BCI and other problems.
13
2
PANEL DESCRIPTION
ACC(1)
PIN NO. PIN NAME
DESCRIPTION
SPECIFICATIONS
1
RTTY
Controls RTTY keying.
“HIGH” level
: More than 2.4 V
“LOW” level
: Less than 0.6 V
Output current
: Less than 2 mA
2
GND
Connects to ground.
Connected in parallel with ACC(2) pin 2.
3
SEND
Input/output pin.
Goes to ground when transmitting.
When grounded, transmits.
Ground level
: –0.5 V to 0.8 V
Output current
: Less than 20 mA
Input current (Tx)
: Less than 200 mA
Connected in parallel with ACC(2) pin 3.
4
MOD
Modulator input.
Connects to a modulator.
Input impedance
: 10 k
Ω
Input level
: Approx. 100 mV rms
5
AF
AF detector output.
Fixed, regardless of [AF] position in
default settings. (see notes below)
Output impedance : 4.7 k
Ω
Output level
: 100 to 300 mV rms
6
SQLS
Squelch output.
Goes to ground when squelch
opens.
Squelch open
: Less than 0.3 V/5 mA
Squelch closed
: More than 6.0 V/100 µA
7
13.8 V
13.8 V output when power is ON.
Output current
: Max. 1 A
Connected in parallel with ACC(2) pin 7.
8
ALC
ALC voltage input.
Control voltage
: –4 to 0 V
Input impedance
: More than 10 k
Ω
Connected in parallel with ACC(2) pin 5.
Rear panel
view
1
2
3
4
5
6
7
8
ACC(2)
PIN NO. PIN NAME
DESCRIPTION
SPECIFICATIONS
1
8 V
Regulated 8 V output.
Output voltage
: 8 V ±0.3 V
Output current
: Less than 10 mA
2
GND
Same as ACC(1) pin 2.
3
SEND
Same as ACC(1) pin 3.
4
BAND
Band voltage output.
(Varies with amateur band)
Output voltage
: 0 to 8.0 V
5
ALC
Same as ACC(1) pin 8.
6
TRV
Activates [XVERT] input/output
when “HIGH” voltage is applied.
7
13.8 V
Same as ACC(1) pin 7.
Rear panel
view
1
2
3
4
5
6
7
Input impedance
: More than 10 k
Ω
Input voltage
: 2 to 13.8 V
If the CW side tone level limit or beep level limit is in
use, the CW side tone or beep tone decreases from
the fixed level when the [AF] control is rotated above
a specified level, respectively. (p. 65)