![background image](http://html2.mh-extra.com/html/icom/ic-746/ic-746_instruction-manual_4128831059.webp)
57
8
SCAN OPERATION
8-3 Memory scan
8-4 Select memory scan
CH
AGC
AMP
P.
SWR
ALC
Po
20
50
3
2
1
1.5
100%
1
S
SCN
MEMO SCAN
MEM ∂F SEL SPN SET
F1
F2
F3
F4
F5
MEMO
[V/M]
Tuning dial
[MENU]
Scan menu
Push [F-1] to start/stop memory scan.
CH
AGC
AMP
P.
SWR
ALC
Po
20
50
3
2
1
1.5
100%
1
S
SCN
SEL-MEMO SCAN
MEM ∂F SEL SPN SET
F1
F2
F3
F4
F5
MEMO
Tuning dial
[MENU]
[V/M]
Scan menu
Push [F-3] to toggle between memory scan
and select memory scan.
SEL
Select indicator
Memory scan searches through memory channel 1 to
99 for signals. Blank (unprogrammed) memory chan-
nels are skipped.
➀
Push [V/M] to select memory mode, if necessary.
➁
Push [MENU] to select
M2
.
➂
Push [F1] to select the scan menu.
➃
Push [F1] to start/stop memory scan.
• The MHz and kHz decimal points flash during scan.
• At least 2 memory channels must be programmed for
memory scan to proceed.
• Rotating the tuning dial during memory scan cancels the
scan.
Select memory scan searches through memory chan-
nel set as “select” for signals. See below for
setting/deleting select memory channels
➀
Follow the steps above to start memory scan.
➁
During memory scan, push [F3] to toggle between
memory scan and select memory scan.
➂
Push [F1] to stop the scan.
• At least 2 memory channels must be programmed for
memory scan to proceed.
• Rotating the tuning dial during memory scan cancels the
scan.
■
SETTING/DELETING SELECT MEMORY
CHANNELS
All memory channels except scan edges (P1, P2) can
be set as select memory channels.
While the scan menu is selected, push [F3] to toggle
a memory channels select setting.
• “SEL” appears when a channel is set as a select channel.
Summary of Contents for IC-746
Page 90: ......