![background image](http://html2.mh-extra.com/html/icom/ic-746/ic-746_instruction-manual_4128831065.webp)
63
10
SET MODE
SET
PTT Tune
OFF
SET
ANT Select
Auto
SET
SPEECH Language
English
SET
SPEECH Speed
HIGH
SET
SPEECH S-Level
ON
SET
Memory Pad Ch
5
20.
PTT Tune
Tuning of the external antenna tuner can be started
automatically at the moment the PTT is pushed after
is the operating frequency is changed (more than 1%
from the last-tuned frequency).
21.
ANT Select
You can set the antenna connector selection to auto-
matic, manual or non-selection (when using 1 an-
tenna only).
When “AUTO” is selected, the antenna switch is acti-
vated and the band memory memorizes the selected
antenna. See p. 71 for details.
When “MANUAL” is selected, the antenna switch is
activated and selects an antenna manually.
When “OFF” is selected, the antenna switch is not ac-
tivated and does not function. The [ANT1] connector
is always selected in this case.
22.
SPEECH Language
When the optional UT-102
VOICE SYNTHESIZER UNIT
is
installed, you can select between English and Japan-
ese as the language. See p. 77 for unit installation.
23.
SPEECH Speed
When the optional UT-102
VOICE SYNTHESIZER UNIT
is
installed, you can select between faster or slower syn-
thesizer output. See p. 77 for unit installation.
24.
SPEECH S-Level
When the optional UT-102
VOICE SYNTHESIZER UNIT
is
installed, you can have frequency, mode and signal
level announcement. Signal level announcement can
be deactivated, if desired. See p. 77 for unit installa-
tion.
25.
Memory Pad Ch
This item sets the number of memo pad channels
available. 5 or 10 memo pads can be set.
Summary of Contents for IC-746
Page 90: ......