![background image](http://html2.mh-extra.com/html/icom/ic-746/ic-746_instruction-manual_4128831028.webp)
26
4
USING DIFFERENT OPERATING MODES
BLANK
CH
VFOA
ANT
AGC
AMP
P.
SWR
ALC
Po
S
1
20
50
3
3
2
1
1.5
5
7
9
20
40
60
100%
1
1
S
Normal
Number Style
001
F1
F2
F3
F4
F5
CW
F
Set item up/down
Normal
Number Style
001
M2
Count Up Trig
001
CLR 001
Present Number
001
(4) Contact number menu
This menu is used to set the contact (serial) number
and count up trigger, etc.
➀
Push [F1] or [F2] to select the set contents.
➁
Rotate the tuning dial to set the condition.
• See below for details.
➂
Push [MENU] 2 times to return to regular operation
(M1).
This item sets the numbering system used for con-
tact (serial) numbers—normal or morse cut numbers.
• Normal: does not use morse cut numbers (default).
• 190
➞
ANO: sets 1 as A, 9 as N and Ø as O.
• 190
➞
ANT: sets 1 as A, 9 as N and Ø as T.
• 90
➞
NO: sets 9 as N and Ø as O.
• 90
➞
NT: sets 9 as N and Ø as T.
This item sets the count up trigger channel.
• M1, M2, M3 or M4 can be set.
This item shows the current number for the count up
trigger channel set above.
• Rotate the tuning dial to change the number, or push
[F3](
CLR
) for 2 sec. to reset the current number to 001.
SET MODE ITEM AND DEFAULT CONDITION
DESCRIPTION
Summary of Contents for IC-746
Page 90: ......