![background image](http://html.mh-extra.com/html/icom/ic-703/ic-703_instruction-manual_612184095.webp)
80
12
SET MODE
26 SPL OFFSET
This item sets the offset (difference between transmit
and receive frequencies) for the quick split function.
Available offset frequencies are –9.999 to 9.999 MHz
in 0.001 MHz (1kHz) steps.
Default is 0.000 MHz.
*
25 SPLIT LOCK
When this item is ON, the main dial can be used to
adjust the transmit frequency while pushing
[
(F-3)
XFC
] even when the lock function is activated.
Split lock function OFF
(default)
Split lock function ON
*
30 AM NB
(Noise blanker in AM mode)
When this item is set to ON, the noise blanker func-
tion is available in AM mode. This is useful when
communicating in AM mode (the noise blanker func-
tion should not be used when listening to regular AM
broadcasts as it may degrade the received audio).
Noise blanker is available
on AM mode. (default)
Noise blanker is not
available on AM mode.
28 SCAN SPEED
(Scanning speed)
This item sets the rate at which channels or frequen-
cies are scanned during scan operations. High or low
can be selected.
Scan speed is set to high
(default).
Scan speed is set to low.
29 U/D SPEED
([UP]/[DN] speed)
This item sets the rate at which frequencies are
scanned through when the [UP]/[DN] switches of the
microphone are pushed and held. High or low can be
selected.
Up/down speed is set to
high (default).
Up/down speed
is set to low.
27 SCAN RESUME
This item sets the scan resume function ON or OFF.
on : Scan resumes 10 sec. after stopping on a sig-
nal (or 2 sec. after a signal disappears);
oFF: Scan does not resume after stopping on a sig-
nal. For the priority watch, setting to OFF
pauses the watch until signal disappears and
scan resumes.
Scan resume function is
turned ON (default).
Scan resume function is
turned OFF.
31 PAD CH
(Available memo pads)
This item sets the number of memo pad channels
available. 5 or 10 memo pads can be selected.
5 memo pads are available
(default).
10 memo pads are
available.
(Split lock function)
(Split offset frequency)
(Scan resume condition)
12
When “
3 SIMPLE MODE
” is set to ON, * marked items are undisplayed.