![background image](http://html.mh-extra.com/html/icom/ic-703/ic-703_instruction-manual_612184008.webp)
Microphones: Connect the microphone to the modu-
lar-type connector bottom of the front panel or back
of the radio.
Rear panel
Front panel
MICROPHONES
HM-103
SM-20
OPC-589
III
QUICK REFERENCE GUIDE
5. Connect other peripheral equipment
Everyone has his or her favorite ad-on gear; now is
the time to connect this gear! We will cover the basic
devices that can be connected to your IC-703.
If you do not see the particular item you are wanting
to connect, refer to the Advance Connections section
starting on page 14.
■
Operation
1. Voice
CW Key: There are several types of keys or keyers
that can be used with your IC-703.
a. Iambic Key paddle:
Use a 6.35(d) mm (
1
⁄
4
″
) stereo
plug and connect to the [KEY] jack located on the
rear of the radio.
b. Straight Key:
Use a 6.35(d) mm (
1
⁄
4
″
) mono plug
and connect key to the back of the radio.
c. External Keyer:
Use a 6.35(d) mm (
1
⁄
4
″
) mono
plug and connect to the back of the radio.
d. Computer Keying:
Use a 6.35(d) mm (
1
⁄
4
″
) mono
plug and connect to the back of the radio.
NOTE:
You will need to select the type of keyer you
are using in the keyer set mode. There are many
advanced CW functions in this set mode. Until you
have a full understanding of these functions
change only the items necessary.
Rear panel
CW KEY
A straight key can be used when the internal
electronic keyer is turned OFF in keyer set
mode. (p. 32)
When connecting a straight key or else
(
+
)
(
_
)
Rear panel
CW KEY
(dot)
(com)
(dash)
When connecting a paddle
2. CW