![background image](http://html.mh-extra.com/html/icom/ic-703/ic-703_instruction-manual_612184010.webp)
V
QUICK REFERENCE GUIDE
D
D
Just listening
1. Select the desired band
3. Adjust audio output
On your IC-703, an easy way of changing bands is by
using the [
(
Y
)
BAND] or [
(
Z
)
BAND
] located just right
corner on the front panel.
Push [
(
Y
)
BAND] or [
(
Z
)
BAND] to select the desired
band.
• Pushing [
(
Y
)
BAND] or [
(
Z
)
BAND] continuously scrolls
through the available bands.
• Say you want to go to 20 meters or 14 MHz; you
would push [
(
Y
)
BAND] or [
(
Z
)
BAND
] several times
to select it. This will change the displayed operating
frequency to the 20-meter band.
NOTE:
The band stacking register can also be
used to select bands. (Refer to p. 22)
[
Y
]
[
Z
]
Directly left of the [
(
Y
)
BAND]/[
(
Z
)
BAND
] is the main
dial. This will allow you to dial in the frequency you
want to operate. You will notice the tuning speed [TS]
is 10 Hz resolution. Page 20 will instruct you on how
to set the tuning speed [TS] for 1 Hz resolution.
Adjust this control to a comfortable audio level.
AF
RF/SQL
No audio output
Max. audio output
Decreases
Increases
2. Tune to the desired frequency