4
SCAN
9
D
Setting the Scan Stop Timer
q
Hold down [TOP] for 2 seconds to enter the Set
mode.
w
Push [Side 1] or [Side 2] several times to select the
Scan Stop Timer function.
• “S-TIME” is displayed.
e
Rotate [ROTARY SELECTOR] to select the scan stop
time.
5/10/15
: Scan pauses for 5, 10 or 15 seconds when a signal is
detected, then resumes.
P5
:
Scan pauses until the signal disappears, and then
resumes after 5 seconds (Recommended setting).
r
Hold down [TOP] for 2 seconds to set and exit the
Set mode.
Scanning preparation (Continued)
Scan Stop Timer
P5 (default)
10 second setting
Open scan
An Open scan automatically searches for busy
channels and enables you to locate new stations for
communication or listening.
q
Push several times until Open scan is selected.
• “
” is displayed.
Displayed
w
Push
to start the scan.
Scan start channel
Blinks
e
When receiving a signal, the scan pauses and
resumes, according to the selected Scan Stop
Timer setting.
r
Push
to cancel the scan.
Group and Priority scan
Group and Priority scans repeatedly searches for
a signal on the Priority channel while scanning the
tagged channels. This is useful when waiting for a call
on the Priority channel or several tagged channels.
Group and Priority scans are performed differently
while transmitting. Group scan searches on a Prior-
ity channel or on a busy channel, and Priority scan
searches only on the Priority channel.
q
Push
until Group or Priority scan is selected.
• “
” is displayed when Group scan is selected, and
“
” is displayed when Priority scan is selected.
Appears
Group scan is selected.
Displayed
Priority scan is selected.
Displayed
r
When receiving a signal, the scan pauses and then
resumes according to the Scan Stop Timer setting.
t
Push
to cancel the scan.
w
If Priority scan is selected in step
q
, set the
Priority channel by holding down
for 2 seconds
after selecting the desired channel.
• To cancel the Priority channel setting, push [TOP] to
enter the Function mode, and then hold down
for 2
seconds.
e
Push
to start the scan.
Group scan starts.
Priority scan starts.
Scan start channel*
Blinks
Priority channel*
Blinks
*Priority channel is displayed instead of the scan start channel
if the Priority channel is set in step
w
.
