1
2
BASIC OPERATION
( Selectable only when more than 2 zones are set, using the
optional CS-41PRO
clOning
sOftware
)
A zone enables you to allocate several channels into
a logical group. This is useful if you want to simplify
communications, particularly in commercial or convoy
applications, or if you want to separate out the receive
only channels to be scanned separately from CB
channels.
q
Push [TOP] to enter the Function mode.
w
Hold down
for 2 seconds to enter the zone
selection mode.
e
Rotate [ROTARY SELECTOR] to select the desired
zone, and then push
to set.
NOTE:
•
The transceiver remains in the selected mode when
turned OFF and then ON again.
• CB-05, CB-R05 and CB-35 channels are for emergency
use, and are required to be left open for only emergency
use. CB-22 and CB-23 are used for only receiving.
Zone selection
The Priority channel enables you to have quick access
to a specific channel. Only one channel can be set as
the Priority channel. “P” is displayed when the Priority
channel is set.
D
Setting the Priority channel
q
Rotate [ROTARY SELECTOR] to select a desired
channel.
w
Hold down
for 2 seconds to set the selected
channel as the Priority Channel.
• “P” is displayed.
D
Switching to the Priority channel
➥
Push
to switch from a displayed channel to the
Priority channel. “N/A” is displayed when the Priority
channel is not set.
D
Cancelling the Priority channel
➥
Push [TOP] to enter the Function mode, and then
hold down for 2 seconds to cancel the Priority
channel setting.
• “P” disappears.
Priority channel
Monitor
The Monitor function opens the Squelch or Tone
squelch, enabling you to receive weak signals. This
enables quick access to the open squelch setting.
➥
To turn the Monitor function ON or OFF, push [Side 1].
• “ MONI ON” or “MONI OF” is displayed when the function
is turned ON or OFF.
Squelch
In order to clearly receive signals, set the squelch
level to suit your environment. This eliminates
background noise when there are no signals preset.
A higher level is better for inner cities or noisy areas,
and a lower level is more beneficial in quiet, rural or
country areas.
Setting the squelch level:
q
Push [Side 2] to enter the squelch setting mode.
w
Rotate [ROTARY SELECTOR] to set the squelch
level to between 0 and 9.
• 0= lowest squelch level, 9= highest squelch level
e
Push [Side 2] to set the selected squelch level and
exit the setting mode.
Information
You can also set the squelch level in the Set mode.
See page 5 for details.
