![background image](http://html2.mh-extra.com/html/icom/ic-2720h/ic-2720h_instruction-manual_3566317052.webp)
35
New2001
5
MEMORY OPERATION
■
Memory bank selection
The IC-2720H has a total of 10 banks
(A to J)
. Regular mem-
ory channels, 000 to 199, are assigned into the desired bank
for easy memory management.
q
Push the desired band’s
[M/CALL•MW] several
times to select memory
mode, if desired.
w
Push the same band’s
[MAIN•BAND] for 1 sec.
to select memory bank
condition.
• Bank initial blinks
e
Rotate the same band’s
[DIAL] to select the de-
sired bank, A to J.
• Banks that have no pro-
grammed contents are
skipped.
r
Push the [MAIN•BAND] to set the bank.
• Initial stops blinking.
t
Rotate the [DIAL] to select the contents in the bank.
• No channel numbers are displayed for memory bank operation.
y
To return to regular memory condition, push the
[MAIN•BAND] for 1 sec. then push the [MAIN•BAND] mo-
mentarily again.
z
Push [MR/CALL] to select memory mode, if de-
sired.
x
Push [FUNC] then [
MONI
1(BANK)] to select
memory bank condition.
• Bank initial blinks
c
Push [
Y
]/[
Z
] to select the desired bank, A to J.
• Only programmed memory bank can be selected.
v
Push [
CLR
A(MW)] to set the bank.
• Initial stops blinking.
b
Push [
Y
]/[
Z
] to select the desired contents in
the bank.
• No channel numbers are displayed for memory
bank operation.
n
To return to regular memory condition, push
[FUNC], [
MONI
1(BANK)] then push [
CLR
A(MW)].
BANK
[
Y
]/[
Z
]
MAIN
T X
M
Push [MAIN•BAND] for 1 sec.
to select memory bank.
Bank initial appears
IC-2720H_2.qxd 03.5.13 9:45 Page 35 (1,1)