![background image](http://html2.mh-extra.com/html/icom/ic-2720h/ic-2720h_instruction-manual_3566317036.webp)
The sub band mute function automatically cuts out sub band
audio signals when both main and sub band signals are re-
ceived simultaneously.
While operating on the main band, a beep sounds to inform
you that a signal was received on the sub band.
q
While pushing [SET•
], push [PWR] for 1 sec. to enter
initial set mode.
w
Push [SET•
] or [LOW•PRIO] until “SUb” appears in the
display as shown above.
e
Rotate the left band’s [DIAL] to select the condition.
r
Push [PWR] momentarily, to exit initial set mode and return
to the previous indications.
While pushing [SET• ]
push [PWR] to enter initial
set mode
MAIN
T X
M
The display shows that
the sub band mute is
turned ON and sub band
busy beep is turned ON.
19
3
BASIC OPERATION
New2001
■
Sub band mute/sub band busy beep
USING
INITIAL SET MODE
DISPLAY
SUB BAND MUTE
BUSY BEEP
SUb-OF
OFF
OFF
SUb-OF
S
OFF
ON
SUb-On
ON
OFF
SUb-On
S
ON
ON
IC-2720H_2.qxd 03.5.13 9:45 Page 19 (1,1)