![background image](http://html2.mh-extra.com/html/icom/ic-2720h/ic-2720h_instruction-manual_3566317061.webp)
44
7
SCAN OPERATION
New2001
7
■
Skip channel setting
The memory skip function speeds up scanning by checking
only those memory channels not set as skip channels. Set
skip channels as follows.
q
Select a memory channel in the desired band:
➥
Push the desired band’s [M/CALL•MW] to select mem-
ory mode.
➥
Rotate the same band’s [DIAL] to select the desired
channel to be a skip channel.
w
Push [SET•
] to enter set mode.
e
Push [SET•
] or [LOW•PRIO] several times until “CHS”
appears as shown above.
r
Rotate the [DIAL] to turn the skip function ON or OFF for
the selected channel.
• “
~
” appears
: The channel is skipped during scan.
(CHS-On)
• “
~
” disappears : The channel is scanned during scan.
(CHS-OF)
t
Push [TONE•DTMF] to exit set mode.
z
Select a memory channel.
➥
Select memory mode by pushing [MR/CALL].
➥
Push [
Y
] or [
Z
] to select the desired channel
to be a skip channel.
• Direct memory channel selection is also available.
x
Push [
SET
B(D-OFF)] to enter set mode.
c
Push [
SET
B(D-OFF)] or [
ENT
C(T-OFF)] several
times until “CHS” appears as shown at left.
v
Push [
Y
] or [
Z
] to set or cancel the skip setting.
• See item
r
at left for skip indicator details.
b
Push [
CLR
A(MW)] to exit set mode.
SET
B
MAIN
T X
M
SKIP
The display shows that memo-
ry channel 1 is set as a skip
channel.
USING
SET MODE
IC-2720H_2.qxd 03.5.13 9:45 Page 44 (1,1)