![background image](http://html1.mh-extra.com/html/icom/gm800/gm800_instruction-manual_3594352058.webp)
53
2001 NEW
2001 NEW
DSC OPERATION
7
■
Sending a Non-Distress calls
D
Sending a Test call (continued)
3. Select “Test.”
4. Select “Address.”
5. Select an Individual ID, or “Manual Input.”
(Example: STATION A)
NOTE:
When you select “Manual Input” in
this step, push the keypad to manually enter an
Individual ID.
6. Select “Call Frequency.”
7. Select an option. (Example: 8414.5 kHz)
8. Push [Call]
to send the Test call.
9. After sending, the following screen is displayed.
See page 29 for details of the software key function
in the DSC Task mode.
10. Push [Standby Mode]
to return to the
Standby mode.
D
Sending a Test call acknowledgement
When a Test call is received, you can send an
acknowledgement.
1. When a Test call is received:
•
Alarm sounds.
•
The following screen is displayed.
Push any [Alarm Off]
.
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
Push
Push
any