![background image](http://html1.mh-extra.com/html/icom/gm800/gm800_instruction-manual_3594352056.webp)
51
2001 NEW
2001 NEW
7
DSC OPERATION
D
Sending a Position Request call (continued)
9. After sending, the following screen is displayed.
• See page 29 for details of the software key function
in the DSC Task mode.
10. Push [Standby Mode]
to return to the
Standby mode.
D
Sending a Position Request
acknowledgement
When receiving a Position Request call, you can
send an acknowledgement.
1. When a Position Request call is received:
•
Alarm sounds.
•
The following screen is displayed.
Push any [Alarm Off]
.
2. Push [Accept]
.
•
Enters the DSC Task mode.
•
“
✔
” is displayed on the Task tab.
3. Push [
≈
] to scroll the software key function.
4. Push a key to select an acknowledgement option.
(Example: ACK (Able))
Information
ACK (Able):
Send an acknowledgment with position data and
time.
ACK (Unable):
Send an acknowledgment, but it does not include
position data.
•
The call contents screen is displayed.
Rotate [CH/GRP] to confirm the contents.
Change your position data, if the displayed data is
invalid. (p. 27)
5. Push [Call]
to send the Position Request
acknowledgement.
•
Your position data and time are transmitted.
6. Push [Standby Mode]
to return to the
Standby mode.
TIP:
When “Position ACK” is set to Auto, the
transceiver automatically replies to the call.
(p. 71)
Push
Push
Push
■
Sending a Non-Distress calls