background image

6

MENU SCREEN

6-6

Clock

Clock Adjust

Sets the date and time.

p. 6-15

Clock Auto Adjust

Selects whether or not to automatically adjust the clock with data from the internal GPS 

receiver.

p. 6-15

Clock Display

Displays the current time on the transceiver’s LCD.

p. 6-15

DST  (Daylight Saving Timer)

Selects whether or not to use Daylight Saving Time (DST) for the clock.

p. 6-15

Vibration

Opening Vibration

Selects whether or not to vibrate the transceiver when it is turned ON. (Portable only)

p. 6-15

Vibration

Turns the Vibration function ON or OFF. (Portable only)

p. 6-15

Key Vibration

Selects whether or not to vibrate the transceiver when a user pushes a key. 

(Portable only)

p. 6-15

Sensor

Man down Angle

Sets the Emergency mode detection angle for the Man Down function. (Portable only)

p. 6-16

Motion Sense

Sets the acceleration sensor sensitivity to detect whether the user is moving or not, for 

the Motion Detection function. (Portable only)

p. 6-16

Stationary Sense

Sets the acceleration sensor sensitivity to detect if the user is stationary or not for the 

Stationary Detection function. (Portable only)

p. 6-16

Display

Backlight

Sets the Key Backlight status.

p. 6-16

Dimmer

Sets the LCD dimmer level.

p. 6-16

Brightness

Sets the LCD brightness level.

p. 6-16

LCD Color Test

Checks whether or not the LCD displays color correctly.

p. 6-16

LCD Mode

Sets the LCD Mode.

p. 6-16

Menu items (Continued)

Previous view

Summary of Contents for F6400DS 11























































































































































































Reviews: