![background image](http://html1.mh-extra.com/html/icom/f6400ds-11/f6400ds-11_operating-manual_4287621068.webp)
6
MENU SCREEN
6-14
Bluetooth
Turns the Bluetooth
®
function ON or OFF.
•OFF: Turns OFF the function.
•ON: Turns ON the function.
Bluetooth Reset
Initializes the Bluetooth
®
unit.
Only when the Bluetooth
®
function is OFF, initialization
can be done
Bluetooth Auto Connect
Select whether or not to automatically connect to the
paired Bluetooth
®
device when its power is turned ON.
•OFF: Does not connect to the paired device.
•ON: Automatically connects to the last connected
device.
Bluetooth Audio Setting
Selects the AF Output device when a Bluetooth
®
headset is connected.
•BT Only: Sets the Bluetooth
®
headset as the AF
Output device.
•BT & SP: Sets the Bluetooth
®
headset and the
transceiver’s speaker as the AF Output
devices.
BT Device Info
Displays the installed Bluetooth
®
unit name, address,
supported profile, and its version information.
BT Device List
Displays the paired Bluetooth
®
devices.
To find other Bluetooth
®
device, select “Find Device.”
L
See pages 11-6 and 11-9 for details.
Key Beep (VS-3)
Sets the beep sound when the optional VS-3
Bluetooth
®
headset
Custom Key ([PLAY]/[FWD]/
[RWD]) is pushed.
•OFF: No beep sounds.
•ON: A beep sounds.
Bluetooth
P.Save (VS-3)
Selects whether to operate in the Bluetooth
®
headset’s Battery Saving mode when the optional
VS-3 Bluetooth
®
headset
is connected. When the
Power Save is activated, the user cannot use the VOX
function.
NOTE:
When a third-party headset or a data device
is connected, this function is automatically set to
OFF, even if this item is set to ON.
•OFF: Turns OFF the function.
•ON: The Power Save mode is enabled when no
communication or operation is performed for
120 seconds.
PTT Beep (VS-3)
Sets the beep sound when [PTT] is pushed on the
optional VS-3 Bluetooth
®
headset
.
•OFF: No beep sounds.
•ON: A beep sounds.
One-touch PTT
Sets the One-Touch PTT function when the Bluetooth
®
headset is connected. The function enables a user to
transmit without continuously holding down [PTT].
NOTE:
When a third-party headset is connected, this
function may automatically be set to ON, even if this
item is set to OFF.
•OFF: Push [PTT] to transmit, then release to
receive.
•ON: Push [PTT] to transmit, then push again to
receive.
Waiting Pairing
Enters the pairing request wait mode. The transceiver
waits for a pairing request from a Bluetooth
®
device.
Previous view