manualshive.com logo in svg

Icom F3400D 21, Operating Manual

Share
Download
Icom F3400D 21 Operating Manual Download Page 42

4

ADVANCED OPERATION

4-2

DTMF calls

 

D

Manual Dialing

A user can send DTMF codes.

While holding down [PTT], push the keys on the Ten-

key pad.

 

D

Autodial

A user can quickly send DTMF tones that have been 

pre-entered into the transceiver.

1.   Push [DTMF Autodial] to display the “DTMF 

Autodial” screen.

  

2.   Push [Up] or [Down] to select a DTMF Memory.

  

3.   Push [PTT] to send the selected DTMF Memory’s 

codes.

 • After sending, automatically returns to the standby 

screen.

 

D

Stun function

  (Only for LTR operation)

The Stun function is used when a transceiver is stolen 

or lost, and the function deactivates the transceiver.

When the transceiver receives a matching DTMF 

code, the stun function is activated and the transceiver 

operation is inhibited. In this case, entering the 

password or reprogramming is necessary to operate 

the transceiver again.

TIP:

 In the standby screen, a user can send the 

currently selected DTMF Memory’s codes by 

holding down [Autodial].

Previous view

Summary of Contents for F3400D 21























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands