Icom F3400D 21 Operating Manual Download Page 12

Page: 12 / 182

PANEL DESCRIPTION

2-4

VIBRATION ICON

Displayed when the Vibration function is ON.

VOX ICON

Displayed when the VOX function is ON.

Bluetooth

ICON

•Displayed when Bluetooth

is activated.

•Lights Blue when a Bluetooth

device is connected.

• Does not light when no Bluetooth

device is

connected.

microSD ICON

Displayed when the microSD card is inserted into the

card slot.

“ ” is displayed when the microSD card has not

been formatted.

USB ICON

Displayed when a USB device is connected.

Text Area

Displays the selected Zone number, Channel number,

and Channel name, if set.

Key Display Area

Displays the names of the function assigned to [P1]

and [P2].

Function display (for the Portable type transceiver)

NOTE:

The screen capture is an example. The

displayed position of each icon may differ, depending

on the function being used.

Icon Area

Text Area

Key Display

Area

Icons (Continued)

Previous view

Summary of Contents for F3400D 21























































































































































































Search results

Summary of Contents for F3400D 21

Reviews:

Related manuals for F3400D 21

Brands by name

Popular brands

Icom F3400D 21, Operating Manual

Search results

Summary of Contents for F3400D 21

Reviews:

Related manuals for F3400D 21

Brands by name

Popular brands