![background image](http://html1.mh-extra.com/html/icom/f1000d-01/f1000d-01_operating-manual_611930026.webp)
5
USER SETTINGS
5-4
Setting the Ringer level
The Ringer level can be adjusted between 1 and 5,
or 1 (Linked) and 5 (Linked). When a Linked option
is selected, the ringer audio level is adjustable by
rotating [VOL].
Rotate [VOL] to turn OFF the transceiver power.
1)
Set [ROTARY SELECTOR] to Channel 16.
2)
While holding down [Lower], rotate [VOL] to
3)
turn ON the power and enter the Ringer level
adjustment mode.
Push [Upper] to increase, or push [Lower] to
4)
decrease the Ringer level.
• Repeatedly pushing [Upper] first selects 1 (lowest) to
5 (highest), and then selects the lowest linked level, 1
(Linked) to the highest, 5 (Linked). Repeatedly pushing
[Upper] or [Lower] repeats the cycle. See the illustration
on the right.
• The adjustable range is 1 to 5 or 1 (Linked) to 5
(Linked).
• A beep sounds after pushing [Upper]. Therefore,
you can determine the current level setting by the
increasing loudness of the beep that sounds.
• To determine if you have selected a linked level, set
[VOL] to minimum, then push [Upper] up to 10 times,
listening for the loudest beep (level 5). Pushing [Upper]
once after the loudest beep will select 1 (Linked).
Repeatedly push [Upper] or [Lower] to select the
desired linked level.
Rotate [VOL] to turn OFF the power to exit the
5)
Ringer level adjustment mode.
[ROTARY SELECTOR]
[VOL]
[Upper]
[Lower]
2
5
4
3
1
5 (Linked)
4 (Linked)
3 (Linked)
2 (Linked)
1 (Linked)
Pushing
[Upper]
Pushing
[Lower]
NOTE:
You should turn ON the Beep function (p. 5-2)
before you start setting the Ringer level.