![background image](http://html1.mh-extra.com/html/icom/f1000d-01/f1000d-01_operating-manual_611930024.webp)
5
USER SETTINGS
5-2
Setting the Beep function
The Beep function can be turned ON or OFF.
NOTE:
You should turn ON the Beep function when you
set the Beep level, the Ringer level, the microphone
gain, the VOX function, the VOX gain and the
squelch level.
Rotate [VOL] to turn the transceiver power OFF.
1)
Set [ROTARY SELECTOR] to any channel other
2)
than Channel 16.
While holding down [Lower], rotate [VOL] to turn
3)
ON the power to enter the Beep level adjustment
mode.
Push [Lower] to turn the Beep function ON or OFF.
4)
• When a beep sounds after pushing [Lower], the
Beep function
is ON. When no beep sounds after
pushing [Lower], the Beep function is OFF.
• The transceiver stores the setting every time you
change it.
• If desired, push [Upper] to adjust the Beep level. See
page 5-4 for details.
Rotate [VOL] to turn OFF the power to exit the
5)
Beep level adjustment mode.
[ROTARY SELECTOR]
[VOL]
[Upper]
[Lower]