![background image](http://html1.mh-extra.com/html/icom/f1000d-01/f1000d-01_operating-manual_611930016.webp)
3
NXDN™ OPERATION
3-4
Transmitting a call
Transmitting a Call Alert
Hold down [Call Alert].
Â
Transmitting an Emergency call
When holding down [Emergency] for the set time
period, the transceiver enters the Emergency mode
then the countdown starts.
After the countdown, the transceiver transmits
an Emergency call (digital command) once, or
repeatedly, on the specified Emergency channel.
Countdown beeps sound for the set time period.
When no Emergency channel is specified, it transmits
the call on the previously selected channel.
Individual or Talkgroup call types of Emergency calls
can be preset. If the call type is not preset, a default
or selected call type is used.
If you want to cancel the Emergency call, turn OFF
the transceiver, or hold down [Emergency] for the set
time period again during the first countdown.
If your transceiver is set for Silent operation, you can
transmit an Emergency call without beeps and the
LED indicator lighting.
The transceiver can also be set to keep the
microphone open during an Emergency call, allowing
other persons to monitor the situation. Ask your dealer
for details.
Transmitting a Status call
A Status call can be transmitted by pushing [Status].
Â
Rotate [ROTARY SELECTOR] to select a desired
1)
Status.
Hold down [Status] to transmit a Status call.
2)
A Status call can be automatically transmitted when
Â
the transceiver is turned ON or OFF.
A Status call can be automatically transmitted after
Â
releasing [PTT].
NOTE:
These functions and operations may or may not be available or different, depending on the presetting.
Ask your dealer for preset information.