![background image](http://html1.mh-extra.com/html/icom/c-f43gs/c-f43gs_instruction-manual_4248018011.webp)
7
2
PANEL DESCRIPTION
■
Programmable function keys
The following functions can be assigned to
[UP]
,
[DOWN]
,
[P0]
,
[P1]
,
[P2]
,
[P3]
,
[RED]
and
[MONITOR]
programmable
function keys.
Consult your Icom dealer or system operator for details con-
cerning your transceivers programming.
If the programmable function names are bracketed in the fol-
lowing explanations, the specific key is used to activate the
function depends on the programming.
CH UP AND DOWN KEYS
➥
Push to select an operating channel.
➥
Push to select a transmit code channel after pushing [TX
Code CH Select].
➥
Push to select a DTMF channel after pushing [DTMF
Autodial].
➥
Push to select a scan group after pushing and holding
[Scan A Start/Stop]/[Scan B Start/Stop].
➥
Push to select a BIIS code, status number or SDM after
pushing [Digital].
BANK SELECT KEY
Push this key, then push [CH Up] or [CH Down] to select the
desired bank.
SCAN A KEY
➥
This key’s operation depends on the Power ON Scan set-
ting.
When the power ON scan function is turned OFF;
Push to start and cancel scanning operation. In case of
transmission during scan, cancels scanning.
When the power ON scan function is turned ON;
Push to pause scanning. Scanning resumes after passing
a specified time period. In case of transmission during
scan, pauses scanning. Scanning resumes after passing
a specified time period specified.
➥
Push and hold this key for 1 sec. to indicate the scan
group, then push [CH Up] or [CH Down] to select the
desired group.
SCAN B KEY
➥
Push to start and cancel scanning operation. In case of
transmission during scan, pauses scanning. Scanning
resumes after passing a specified time period.
➥
Push and hold this key for 1 sec. to indicate the scan
group, then push [CH Up] or [CH Down] to select the
desired group.
IC-F33_43GT_GS-1.qxd 04.6.4 3:43 PM Page 7 (1,1)