Cool Mode
• In this mode, the thermostat controls the cooling system . When the
cooling outputs, the snowflake icon apprears on the display .
Note:
There is a four minute delay for your compressor to restart
after it has turned off . To bypass the compressor time delay,
go to OFF mode for 5 seconds .
Cool and Heat Mode
(Auto Changeover)
• In this mode, the thermostat controls the cooling and heating systems,
automatically changing over from one to the other as needed .
• The timing display alternates with the set temperature every 10
seconds in the cool and heat mode .
Emergency Heat Mode
(Heat pump systems only)
• In emergency heat mode, the heat pump system will be disabled and
auxiliary heat will become the primary source of heat .